|
|
Post by braceuself on Aug 13, 2008 15:15:48 GMT 1
there are 2 power plugs.1 for each spotlight.the two spots were wired to one plug.i then wired another 2 spots to other plug and all was fine for about 3 mins and then they all went off and none work.still got my main beam and flashers working though.anyone any ideas?dont know where fuse is.
|
|
taffy1967
turbo
Forum cagoule
'1959-2000 Original & Best'
Posts: 4,345
|
Post by taffy1967 on Aug 13, 2008 21:04:58 GMT 1
Don't know if this helps: -   So did you fit a relay?  |
|
|
|
Post by braceuself on Aug 13, 2008 21:25:28 GMT 1
no.shouldnt it have one anyway?it was the plug for original spots.or maybe They were both put onto one plug for a reason.what could have blown so i can connect the original 2 back up?
|
|
|
|
Post by braceuself on Aug 18, 2008 20:50:21 GMT 1
checked bulbs and they are all ok.checked all fuses in fuse box and on bulkhead.not sure where the relay is for them.haynes is about as much help as my cat.just aint got a clue.
|
|
|
|
Post by mini2infiniti on Aug 18, 2008 20:57:24 GMT 1
Wire them up using a short piece of wire from the battery just to test them.
I dont trust any of the wiring in my mini so anything that I have added that require electricity I have been running new cable.
|
|
|
|
Post by braceuself on Aug 18, 2008 21:10:43 GMT 1
i'll give that a try.thanks
|
|
|
|
Post by braceuself on Aug 19, 2008 21:12:11 GMT 1
yay found the problem.a really badly corroded fuse under the sound proofing.:-)
|
|
