|
|
Post by welshjosh on May 6, 2009 17:18:10 GMT 1
 That black pipe coming of the carb with a bolt init? Is it a breather pipe or something? Also what size is the top hose, the rest of them are 15mm so will it be the same size? |
|
|
|
Post by coedy on May 6, 2009 17:43:43 GMT 1
yep, pipe with the bolt in is a breather, usually goes to one of the engine breathers.
|
|
|
|
Post by welshjosh on May 6, 2009 17:47:54 GMT 1
So where would they be?
I only thought there was one, the one coming up the side under the brake servo
|
|
|
|
Post by jjitaljob on May 6, 2009 18:17:35 GMT 1
leave it like that otherwise you will start bringing bottom end soot from the engine straight into the carb.
|
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on May 6, 2009 19:27:17 GMT 1
there should be 2, the one on the transfer housing ( under the servo) and there should be one on your timing cover.
idealy you want them conected to to carb as it helps reduce crank case preasure
|
|
|
|
Post by jjitaljob on May 6, 2009 19:41:02 GMT 1
yes but damages performance  |
|
|
|
Post by welshjosh on May 6, 2009 21:21:02 GMT 1
I think ill leave it just easier  Any idea with the top hose someone? Need to know so i can order them |
|
taffy1967
turbo
Forum cagoule
'1959-2000 Original & Best'
Posts: 4,345
|
Post by taffy1967 on May 6, 2009 21:45:00 GMT 1
Top hose, do you mean for the water heated manifold?  |
|
|
|
Post by welshjosh on May 6, 2009 21:49:28 GMT 1
Ok ill explain ;D
Im about to buy blue hoses not buying the proper ones cos they are like £75 and i can get cheaper ones of the net and get the fuel lines and that. But on my car the top hose (rad to thermostat) is the wrong size so i got nothing to measure off
|
|
taffy1967
turbo
Forum cagoule
'1959-2000 Original & Best'
Posts: 4,345
|
Post by taffy1967 on May 6, 2009 21:52:56 GMT 1
|
|
Dec 2, 2015 15:29:34 GMT 1
Dec 2, 2015 15:29:34 GMT 1
Apr 1, 2022 15:07:50 GMT 1
Apr 1, 2022 15:07:50 GMT 1