Post by dai9fxey on Jul 7, 2007 23:07:15 GMT 1
Ever tried to get those bolts back on, you know the ones that hold the engine mounts to the subframe and suffered miserably in the process, well here's a simple answer. If you are using the standatd mountings,not the captive bolt type, use a ring spanner, put the head of the bolt in the spanner and then use a bit of masking tape or similar to stick the bolt to the spanner,then feed the bolt through the mounting from the engine side. Hey presto, job done with far less grunting & effing & blinding.
OH, and remember to close the garage door as well, cos it stops next doors dog coming in and sniffing your privates while you are underneath the car and it saves bashing your skull on the sump .
