|
|
A's
Nov 13, 2010 20:36:50 GMT 1
Post by Custard on Nov 13, 2010 20:36:50 GMT 1
hows the best way to get them of ? without damaging the wings as gonna reuse them
|
|
|
|
A's
Nov 13, 2010 20:56:11 GMT 1
Post by jackdaw on Nov 13, 2010 20:56:11 GMT 1
I would use an angle grinder.........very carefully !!!  ;D |
|
ljonez
turbo
Built not bought
Posts: 3,734
|
A's
Nov 13, 2010 21:08:01 GMT 1
Post by ljonez on Nov 13, 2010 21:08:01 GMT 1
If you use a spot weld drill down the seam from the wing side it should come off ok and you will also have the holes in the wing lip ready for plug welding (if that's how you plan on welding it back on)
|
|
Huntyfm
1440cc
If you cant fix it with a hammer its electrical.[F4:Huntyfm]
Posts: 2,633
|
A's
Nov 13, 2010 21:16:21 GMT 1
Post by Huntyfm on Nov 13, 2010 21:16:21 GMT 1
The first welding job I ever seen my father do on a Mini was an A panel, I can't remember it though, sorry got a bit sentimental.
|
|
|
|
A's
Nov 13, 2010 21:24:52 GMT 1
Post by Custard on Nov 13, 2010 21:24:52 GMT 1
Have already split the seam where do i need to cut top and bottom, pics would be great ;D
|
|
|
|
A's
Nov 13, 2010 22:23:36 GMT 1
Post by Custard on Nov 13, 2010 22:23:36 GMT 1
 where do i cut here ? |
|
|
|
A's
Nov 13, 2010 22:51:04 GMT 1
Post by dai9fxey on Nov 13, 2010 22:51:04 GMT 1
I imagine that the Apex panel is scrap.
If that's the case do a vertical cut about an 11/2 or so from the back edge of the Apex panel.
Check behind as you cut to make sure you aren't cutting into anything you shouldn't especially the inner wing and inner A post.
|
|
;D
Dec 2, 2015 15:29:34 GMT 1
Dec 2, 2015 15:29:34 GMT 1
Apr 1, 2022 15:07:50 GMT 1
Apr 1, 2022 15:07:50 GMT 1