|
|
Post by karlhmini on Oct 4, 2011 17:23:36 GMT 1
hi iv had a problem with my wipers when i turn them on they go up but not back down...
can any one helpp please?
we live in a verry wet country!!
|
|
|
|
Post by dai9fxey on Oct 4, 2011 20:00:26 GMT 1
Check the connector block on the wiper motor.
These have a nasty habit of rusting the terminals inside and causes all sorts of problems.
|
|
|
|
Post by dai9fxey on Oct 4, 2011 20:15:41 GMT 1
 Good point Daisy! You can get a replacement clip on self park/terminal unit for about £12 ish. ,,,,, you can also buy the other half of the connector block, with cables, to join into the original wiper motor loom. |
|
|
|
Post by sbplumb53 on Oct 4, 2011 21:01:51 GMT 1
just done both these on mine .simple job.
|
|
|
|
Post by karlhmini on Oct 4, 2011 23:39:12 GMT 1
the wiper blade stops at full swing and starts clicking if i put then on again?
|
|
|
|
Post by Custard on Oct 6, 2011 17:57:53 GMT 1
got a good condition used unit here if needed
|
|
|
|
Post by karlhmini on Oct 6, 2011 23:57:21 GMT 1
cheers for all the help guys much appritchiated fixed the problem now ... the screw on nut at the top what allows the arm to be pushed out and because it wasnt screwed on it couldnt return. cheers for the helpp
|
|
