|
|
Post by byron101 on Feb 12, 2009 21:45:37 GMT 1
don't even go there, had to go down my nephews lock up yard where the bob is to check him over as had a phone call 8am this morning saying 1 of my nephews 4 x 4's had bits nicked of it + has cost him £180 to replace. as far as i can see it ok at moment but want to get sons car out of my garage if he pulls his finger out + sorts it out + then can make a start on bob  |
|
|
|
Post by thereddwarf on Feb 13, 2009 20:32:15 GMT 1
How you gonna wire up the hazards switch, i've heard its a b!tch to work out how to change it over to a nicer looking switch its easy, i wrote a guide a while back which i put on minifinity will see if i can find it if any ones intrested? if you can find it ....can u send me the link to it, i think ive got it sussed but could do with another view on how its done....ty |
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Feb 13, 2009 21:47:18 GMT 1
cant find it, probably down to the minifinity crash a few months back. i've got a simple wireing diagram which i'll dig out
|
|
|
|
Post by byron101 on Feb 13, 2009 22:15:33 GMT 1
cheers lj  |
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Feb 13, 2009 22:21:17 GMT 1
|
|
|
|
Post by thereddwarf on Feb 13, 2009 22:45:26 GMT 1
thats a wee bit more detail than mine had.....i`ll give my way a shot and when it blows up i`ll do it this way...lol....
|
|
|
|
Post by jjitaljob on Mar 4, 2009 23:01:21 GMT 1
qouting oldish post the hoods are the ones that clip into original clock surround am i right lj? i have done that with mine.
|
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Mar 4, 2009 23:16:01 GMT 1
yep their the original ones any progress with the dash ju? |
|
|
|
Post by thereddwarf on Mar 4, 2009 23:26:47 GMT 1
well my holes are cut, new loom almost ready to go in....(borrowed your idea too for the bits aorund the clocks...lol...), just need to wire up the new switches to the loom and paint the dash....
ive gone for using the holes that held the orininal top rail in, bolts are fibreglassed into the dash, i really hope it will be installed ready for malvern, if not its going to look very very messy in there
|
|
|
|
Post by jjitaljob on Mar 6, 2009 23:59:00 GMT 1
i put bolts through the top rail and nuts and then flat headed allen nuts to screw onto the bolt thread. and then l brackets around the bottom rail. and i made a centre steady out of alloy which also hides my reverse swithc wires  |
|
|
|
Post by thereddwarf on Mar 7, 2009 10:53:58 GMT 1
well its not going in for malvern, the loom is untested and the dash needs a bit more paint....off to put the old dash back in so it looks presentable
|
|
|
|
Post by thereddwarf on Mar 17, 2009 19:08:26 GMT 1
The new loom is in, and works fine..(thanks lawson for the hazzard help)...new dash painted, brackets for the clocks are in...so roll on fitting day, cant wait as my switches are dangling...lol....
|
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Mar 17, 2009 20:31:13 GMT 1
The new loom is in, and works fine..(thanks lawson for the hazzard help)...new dash painted, brackets for the clocks are in...so roll on fitting day, cant wait as my switches are dangling...lol.... no problem  it works ok then? will it be in ready for the rolling road day? |
|
|
|
Post by boycie101 on Mar 17, 2009 22:32:23 GMT 1
hopefully be sorted by end of the week, haveing fun + games with bob at the moment   |
|
|
|
Post by thereddwarf on Mar 17, 2009 22:44:44 GMT 1
yep...even the hazzards...had probs wiv one one side of the hazzard lights but all sorted now, and appart from a few teething probs its all running great...
ju
|
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Mar 17, 2009 23:09:12 GMT 1
ah glad its working for you,
its how i did mine and touch wood i've had no problems. the other way to sort them was using 3 or 4 relays in some weird arrangment which i thought just over complicated things.
im looking forward to seeing it
|
|
|
|
Post by welshjosh on Mar 28, 2009 15:46:38 GMT 1
I was going to change the switches in mine to put in the dash
Any ideas what switches i can use?
|
|
|
|
Post by boycie101 on Mar 28, 2009 18:40:32 GMT 1
we got 3 pin illuminated rocker switches in ours, know ljones got flick switches in his if that helps at all. will get ju to post pic up of dash when she can be botherd  lol |
|
|
|
Post by thereddwarf on Mar 28, 2009 18:44:30 GMT 1
|
|
|
|
Post by kelz on Mar 28, 2009 18:46:32 GMT 1
I want one... ;D
|
|
it works ok then?
lol 
