|
|
Post by thereddwarf on Feb 13, 2009 19:07:42 GMT 1
on my new loom, theres a little black box, it was inside the car on the passenger side attached to the bulkhead.....any ideas as to what it is...or does its off a L reg sprite with carbs, and had a little ariel like plug comming off it  any ideas?  |
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Feb 13, 2009 19:49:28 GMT 1
imobilier & alarm  |
|
|
|
Post by thereddwarf on Feb 13, 2009 20:17:16 GMT 1
thanks lawson...i did think it may be that but the ariel thingy threw me a bit......oh well...its going to be removed anyway
its in a different place to the spi one i originally had on the car
|
|
|
|
Post by braceuself on Feb 13, 2009 20:34:46 GMT 1
its the same one i got on mine
|
|
|
|
Post by thereddwarf on Feb 13, 2009 20:39:56 GMT 1
maybe mine was an afterthought...lol....it was a rover alarm but it was smaller and was in the engine bay....
|
|
|
|
Post by byron101 on Feb 13, 2009 20:59:10 GMT 1
stick it on ebay |
|
|
|
Post by thereddwarf on Feb 13, 2009 22:59:37 GMT 1
any 1 know if it can be reprogrammed to another key fob???
|
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Feb 13, 2009 23:05:27 GMT 1
im pretty sure u can synchronise them with new fobs but the imobiliseris key coded to the ecu acording to a few threads on the mini forum
|
|
|
|
Post by byron101 on Feb 13, 2009 23:07:46 GMT 1
thanks
|
|
|
|
Post by thereddwarf on Feb 13, 2009 23:09:55 GMT 1
im pretty sure u can synchronise them with new fobs but the imobiliseris key coded to the ecu acording to a few threads on the mini forum but there is no ecu, as it was a carb model.....it was a real miss match between the spi and the carb models, i`ll be taking the loom appart anyway so it shouldnt get in the way too much |
|
ljonez
turbo
Built not bought
Posts: 3,734
|
Post by ljonez on Feb 13, 2009 23:14:05 GMT 1
im pretty sure u can synchronise them with new fobs but the imobiliseris key coded to the ecu acording to a few threads on the mini forum but there is no ecu, as it was a carb model.....it was a real miss match between the spi and the carb models, i`ll be taking the loom appart anyway so it shouldnt get in the way too much posibly a spi which had been converted to carb  or rover being rover and fitting an spi alarm and imobliiser to a carb version and only using the alarm |
|
exuptoy
1330cc
1980 Rebuild project and 1969 Elf.
Posts: 924
|
Post by exuptoy on Feb 13, 2009 23:18:32 GMT 1
The fob on a m8's rover 400 could be reset with a certain sequence of keypresses after operating the lock manually.
|
|
|
|
Post by thereddwarf on Feb 13, 2009 23:54:10 GMT 1
thanks phil but i have only got the spi fob..its .probably different as the actual alarm box is different
|
|
|
|
Post by byron101 on Feb 14, 2009 0:02:18 GMT 1
cheers mucka |
|
|
|
Post by thereddwarf on Feb 14, 2009 22:39:31 GMT 1
its not a problem....butthanks anyway...i`ll be taking the old alarm wiring out and putting my new one in,,,,,HOPEFULLY
|
|
or rover being rover and fitting an spi alarm and imobliiser to a carb version and only using the alarm 
