|
Post by jd12345 on Mar 22, 2009 18:36:51 GMT 1
ok charlie has a misfire and we have no idea what it could be/ we have changed the plugs, leads, distributor, points, rotary arm, air filter, installed a fuel filter and put fuel cleaning stuff in the tank and we still have no idea where this misfire is coming from we fitted another coil that we had in the garage and the problem was still there? was hoping to bring it to the rolling road run on saturday and have it tuned but not sure now?
any ideas or suggestions? thanks Jamie
|
|
|
Post by thereddwarf on Mar 22, 2009 21:07:33 GMT 1
it could be the timing a tad out?
|
|
|
Post by wolf on Mar 22, 2009 23:01:53 GMT 1
air/fuel mixture is too lean, hate to think this but head gasket leaking.
|
|
|
Post by jd12345 on Mar 23, 2009 0:04:35 GMT 1
i take it that is bad then? well im going to come to the rolling road meet on saturday if anyone else is there that could spare 5mins to take a look that would be great??? thanks people jamie
|
|
|
Post by daddypig on Mar 23, 2009 10:54:22 GMT 1
Inlet manifold gasket failure / leak!
|
|
|
Post by coedy on Mar 23, 2009 17:51:08 GMT 1
sticky carb?
|
|
|
Post by jd12345 on Mar 23, 2009 18:23:46 GMT 1
aaaaaaaaaahhhhhhhhh soooo many things!!!!
|
|