|
|
Post by welshjosh on May 9, 2009 19:34:10 GMT 1
Had a great idea today ;D Wired the fog light into one of the reverse lights so i dont have to have the fog light there. But the heads on the screws are rusted so bad u cannot undo them, so im going to have to grind em off. What should i do? Smooth of the seem or put a bumper back on there? Im not sure because with nothing the exhaust dont look right Also the fog light will be gone as i wired it into the reverse light. But i have to grind it off without    with   |
|
|
|
Post by welshjosh on May 9, 2009 21:29:09 GMT 1
|
|
|
|
Post by Phil J on May 9, 2009 21:38:53 GMT 1
I had an arial like that and it was useless  Prefer the bumper on to be honest, but it's all down to personal choice  |
|
|
|
Post by thereddwarf on May 9, 2009 21:41:17 GMT 1
same here with the arial....they are not that good at all
|
|
|
|
Post by welshjosh on May 9, 2009 22:16:06 GMT 1
any suggestion on the ariel? i dont realy want to drill a hole for it
And im thinking about getting a black bumper
|
|
|
|
Post by Phil J on May 9, 2009 22:18:18 GMT 1
Jamie has one on the rear wing which doesnt look to bad, or just listen to cd's  Why not just spray your bumper black  |
|
|
|
Post by welshjosh on May 9, 2009 22:21:04 GMT 1
well... the bumper was rusted on and i had to grind it off  |
|
|
|
Post by Phil J on May 9, 2009 22:23:32 GMT 1
Might have a black bumper here, will look tomorow |
|
|
|
Post by welshjosh on May 9, 2009 22:35:26 GMT 1
You have everything  Where do you keep it all if you have no garage |
|
|
|
Post by Phil J on May 9, 2009 22:44:21 GMT 1
my shed is like the tardis ;D
|
|
|
|
Post by welshjosh on May 11, 2009 18:02:32 GMT 1
My seats came today  Need to try and fix the drivers side subframe before i can fit them now |
|
|
|
Post by jjitaljob on May 11, 2009 23:23:45 GMT 1
did you get them from midland wheels? if so undo the bolts that join the runner to the legs untiil you have mounted them to the seat, as the subframes dont come square if you understand?
|
|
|
|
Post by welshjosh on May 12, 2009 19:51:20 GMT 1
u mean the 4 fixings under each seat to atach to the subframes?
|
|
|
|
Post by jjitaljob on May 12, 2009 20:37:01 GMT 1
no the ones holding the subframe together. undo those slightly, you will have to glide the runners to one end then undo bolts slightly then slide runners other way and undo the other bolts. once fitted to seat re tighten those bolts. as the subframes dont line up with the seat base as there not bolted together square there just bolted together. otherwise you will go to fit them and think that the subframes arent right..lol.. |
|
|
|
Post by welshjosh on May 13, 2009 17:40:41 GMT 1
Ok will do that
Thank you
|
|
|
|
Post by welshjosh on May 14, 2009 21:13:20 GMT 1
Flip cut it for me the other day As it is raining so much i decided to start it Sorry about poor pics   Also bought a new dash rail  You cant make it out in the pic but it is carpeted |
|
|
|
Post by welshjosh on May 19, 2009 19:30:50 GMT 1
Been busy again after work today Grinded off the fog light, took of the number plate light and grinded down the lip   Also made covers for the cold air feeds, still need to tidy up a bit   And a pic of my work yesterday  |
|
|
|
Post by welshjosh on May 21, 2009 21:14:22 GMT 1
Finally fixed in my relays  Cover my throtle cable with a silicon hose  Also took off un-needed speedo brackets  |
|
|
|
Post by welshjosh on May 23, 2009 9:02:37 GMT 1
Bit more on the dashboard  It workd out good how all the colours match |
|
|
|
Post by welshjosh on May 24, 2009 19:36:49 GMT 1
|
|
