|
|
Post by marvin151173 on Mar 31, 2009 20:38:54 GMT 1
Hey all,
As you all know i didnt come on the rolling road but i've been inspired to post the results from when i did go to see Tommy. I went to see him the week before for a full health check and a bit of a tuning, the guy is a legend!
Enigine information:
Engine Size : 998cc
Mods : Stage 1 Kit with K&N cone filter
Fueling : Freshly reconditioned HS4 carb (waxstat), AAF needle
Exhaust : Manilow freeflow manifold with twin box RC40 exhaust
Wheels : 13" x 7" superlights
results prior to tuning:
Expected Result :30bhp
Actual Result :43.5bhp @ flywheel, 28.5bhp @ wheels
Comments : Running like a bag of bolts, never run right since i've had it!
Results after tuning:
Expected Result :30bhp
Actual Result :50.0 bhp @ flywheel, 34.5bhp @ wheels
Comments : Now thats more like it!
It's been like driving a different car since i've had it done, i actually look forward to driving it now.
Cheers
Marv
|
|
taffy1967
turbo
Forum cagoule
'1959-2000 Original & Best'
Posts: 4,345
|
Post by taffy1967 on Mar 31, 2009 21:15:48 GMT 1
|
|
|
|
Post by mini2infiniti on Mar 31, 2009 21:19:32 GMT 1
74.48 lb/ft @ 73mph, 4430rpm
|
|
taffy1967
turbo
Forum cagoule
'1959-2000 Original & Best'
Posts: 4,345
|
Post by taffy1967 on Mar 31, 2009 21:22:24 GMT 1
74.48 lb/ft @ 73mph, 4430rpm That's good, but I'm not far behind you. ;D |
|
|
|
Post by Phil J on Mar 31, 2009 21:22:40 GMT 1
umm where does it state the torque ?
|
|
|
|
Post by Phil J on Mar 31, 2009 21:26:30 GMT 1
found it  98nm max at 70mph or 3830rpm Havnt got a clue what it means though lol |
|
taffy1967
turbo
Forum cagoule
'1959-2000 Original & Best'
Posts: 4,345
|
Post by taffy1967 on Mar 31, 2009 21:36:42 GMT 1
found it 98nm max at 70mph or 3830rpm Havnt got a clue what it means though lol That's pretty much the same as mine then and that converts to: - 72.27lb/ft @ 3830rpm?Which is considerably more than the original Rover quoted: - 61lb.ft at 3,000rpmSo your engine must have had some kind of modifications done to it as it's exactly the same as mine and we're both putting down a fair bit more power than standard?  |
|
|
|
Post by Phil J on Mar 31, 2009 21:38:58 GMT 1
I'll have to take the time to read through all the paperwork / receipts,, I can't see any obvious mods though |
|
|
|
Post by sarah415 on Mar 31, 2009 21:44:13 GMT 1
Max torque at 61mph or 4530rpm; 128nm :)DEAN
|
|
taffy1967
turbo
Forum cagoule
'1959-2000 Original & Best'
Posts: 4,345
|
Post by taffy1967 on Mar 31, 2009 22:11:32 GMT 1
Max torque at 61mph or 4530rpm; 128nm :)DEAN So that works out at: - 94.40lb/ft @ 4530rpm |
|
|
|
Post by marvin151173 on Mar 31, 2009 22:21:32 GMT 1
max torque 77Nm at 52mph or 4030rpm
again, have no idea if that's good or bad for a 998cc
|
|
|
|
Post by boycie101 on Mar 31, 2009 22:38:35 GMT 1
max torque @ 100mph or 4600rpm : 133nm
overall top speed 123mph
|
|
|
|
Post by Phil J on Mar 31, 2009 22:41:40 GMT 1
Show off  |
|
|
|
Post by boycie101 on Mar 31, 2009 22:46:27 GMT 1
not even my car to show off mate, that's why she don't let me drive it cos keep brakeing it raceing boy racer muppets  |
|
|
|
Post by sarah415 on Mar 31, 2009 22:49:00 GMT 1
i think Vini and Medusa would make an interesting off the mark race ::)what u reckon ;DDEAN
|
|
|
|
Post by Phil J on Mar 31, 2009 22:49:56 GMT 1
I'll take bets  |
|
|
|
Post by boycie101 on Mar 31, 2009 22:51:40 GMT 1
she pampers it too bloody much mate + sick of getting slaps for screwing it
|
|
|
|
Post by sarah415 on Mar 31, 2009 22:54:48 GMT 1
oh thats a shame :-/i even started singing the grease lightening theme in my head then ;DDEAN
|
|
|
|
Post by Phil J on Mar 31, 2009 22:56:35 GMT 1
;D
One for castle combe in sept ?
|
|
|
|
Post by boycie101 on Mar 31, 2009 22:57:00 GMT 1
funny i started singing casualty theme in mine cos that is where she would put me |
|
