|
|
Post by welshjosh on Apr 4, 2009 9:45:56 GMT 1
Do you need it or not? When i had it the vent was taped up and now i took them off so should i blank it of at the heater or leave the hole there so air from the car will go into it  |
|
|
|
Post by coedy on Apr 4, 2009 20:37:55 GMT 1
my heaters push a fair bit more air while im driving if i have the feed in use.... i don't know if you should blank it up really... but it definitely works ok-ish without it...
|
|
|
|
Post by mini2infiniti on Apr 4, 2009 21:25:57 GMT 1
I've gaffa taped and undersealed mine up and it works just fine, my blower only does hot air so if I want cool air I roll down the window
|
|
|
|
Post by welshjosh on Apr 4, 2009 22:40:55 GMT 1
makes sense lol
I took mine off gotta make up some plates now to cover the holes
|
|
|
|
Post by mini2infiniti on Apr 4, 2009 22:46:29 GMT 1
Gaffa tape and underseal, thats all you need  Stops the water coming in too when you drive in the rain |
|
|
|
Post by welshjosh on Apr 4, 2009 23:15:39 GMT 1
you can see mine tho cos the front end is fibregalss one piece thing lol
|
|
|
|
Post by mini2infiniti on Apr 5, 2009 14:29:27 GMT 1
Yeah I guess, just fibreglass the hole up then and sand it back
|
|
|
|
Post by welshjosh on Apr 5, 2009 15:55:18 GMT 1
is it easy to fibreglass?
I might try it
|
|
|
|
Post by mini2infiniti on Apr 5, 2009 15:58:08 GMT 1
You any good at paper mache? It's exactly like that ;D
|
|
|
|
Post by welshjosh on Apr 5, 2009 17:04:03 GMT 1
do i need the thing in the hoses to let the water go through into the heater or not?
|
|
|
|
Post by mini2infiniti on Apr 5, 2009 18:46:29 GMT 1
If you want a heater then yes, if you want a cold air blower then no |
|
|
|
Post by welshjosh on Apr 5, 2009 18:53:55 GMT 1
was that ment to be the otherway?
if i took it off it would always blow hot air you mean?
But if i took the cold air feed off it would blow clold air anyway would it?
|
|
|
|
Post by mini2infiniti on Apr 5, 2009 19:10:21 GMT 1
was that ment to be the otherway? if i took it off it would always blow hot air you mean? But if i took the cold air feed off it would blow clold air anyway would it? If you block the cold air feed off it will still blow cold air but not fresh cold air, itll be recycled from inside the car. So if you fart with the blower on your passengers will soon know about it ;D ;D If you dont connect up the hoses from the head / radiator then you will not have any heat coming from the blower, it will always blow cold air. They dont have a heating element inside them, thats why until the engine warms up the car wont warm up. |
|
|
|
Post by welshjosh on Apr 5, 2009 19:54:03 GMT 1
i know that  i ment the bit that alows water to flow in or not |
|
