exuptoy
1330cc
1980 Rebuild project and 1969 Elf.
Posts: 924
|
Post by exuptoy on Jun 24, 2009 18:25:41 GMT 1
Hey all, I need to find out a few wire colours. I have a few wires going to the coil, white/pink and white/yel on the +ive side and white/black on the -ive side. I think this is correct but there is also a few wires coming out of the loom at the front of the engine, all the browns with the round lugs are going to the starter along with the thick brown/red as well as white/yel (I think it goes to the starter anyway) and I have a white/black and green/light blue going to somewhere near the distributor but seeing as my manual only goes to 86 the white/yellow and green/light blue aren't in there. Anyone have a clue?
|
|
|
|
Post by Phil J on Jun 24, 2009 18:54:55 GMT 1
oil pressure switch? I cant remember off hand but will take a look for you  |
|
exuptoy
1330cc
1980 Rebuild project and 1969 Elf.
Posts: 924
|
Post by exuptoy on Jun 24, 2009 19:20:32 GMT 1
Nah m8 the oil pressure switch is white/brown. Sorted that one. They both appear to be around the dizzy but the colours aren't the same as the manual just checking 100% thats all.
|
|
|
|
Post by welshjosh on Jun 24, 2009 20:45:09 GMT 1
Green blue is water tmep i believe if memory is right Blk/white i thought went to coil or something that way?  |
|
exuptoy
1330cc
1980 Rebuild project and 1969 Elf.
Posts: 924
|
Post by exuptoy on Jun 24, 2009 23:02:24 GMT 1
Water temp..............mmmm you may be right. The pick up is on the head isn't it?
Ta fella.
Now what about the white with the yellow trace?
|
|
|
|
Post by dai9fxey on Jun 25, 2009 17:00:40 GMT 1
The white / yellow as far as i can see connects the Starter Solenoid to the +ive side of the coil.
You should have another w/b going from the - ive side of the coil to the starter solenoid where all the browns connect to.
|
|
exuptoy
1330cc
1980 Rebuild project and 1969 Elf.
Posts: 924
|
Post by exuptoy on Jun 25, 2009 23:26:28 GMT 1
Dai, thanks m8, I dont have a starter solenoid as such as all the contacts are on the starter itself but that is roughly what I got.
I have also managed to source an electronic distributor (Metro maybe?) which has a plug and socket with a white/yellow, and white/black. Are these the same cables as mentioned above as usually you only need the white black for the dizzy to operate. Anyone ever connected in an electonic dizzy?
|
|
