PROBLEM !! does anyone no how to fit the dash

[cooper127588]

hey guys ive got a burr walnut dash and i need to fit it now do i need a Genuine Dash Lower Rail and top to do so and can i fit it with the WINDSCREEN in ? please get back to me ASAP as i need this car finished by Wednesday !

[gar1380]

have you got a lower dash rail in at the moment if not you will need one for the dash to fit on to it as otherwise you will have a gap and wount fit as it shoud
also it would more than likley be loose

is the dash you bought a genuine one or after market ?

[cooper127588]

i haven't got the lower dash rail i have got a dash its burr walnut im not sure if its geniune tho ? can you tell me what dash rails i do need ?? could you send me links for where to get them from e.g minispares or minisport ...

www.minisport.com/acatalog/info_BMC08.html for the lower rail

And for the top rail
www.minisport.com/acatalog/info_JPC4594PMA.html

Could you tell me if these are the right parts and is there anything else

[gar1380]

yes those are the right ones,

[cooper127588]

also do i need any brackets for anything apart from the fixings on the dash itself

[gar1380]

all thats needed on the top is 3 nuts and the bottom just locks in with the silver trim onto the metal part of the lower rail and also the 2 screws that hold the heater up at the front

[cooper127588]

does that come with the bottom rail ?? or do i need to buy them separatly

[gar1380]

not too sure with a brand new one but normaly comes with second hand, best to check