|
Post by cooper127588 on Mar 11, 2010 13:30:03 GMT 1
hey everyone ive just purchased some sportspack wheels all is fine but when i turn the wheels to one side they rub and same when on oppisite lock plus on the back the tyre seems to be rubbing on the body and it shows on the old tyre i had on it !! so do i have to cut the the body away under the arche and what do i do about the back Any advise would be nice Cheers Andrew
|
|
|
Post by Phil J on Mar 11, 2010 15:00:18 GMT 1
Is it rubbing on the arch? if so you will have to trim a bit off, If it's rubbing against the inner wing there isnt much you can do as the sportspack minis had a slightly different steering rack to combat it. Do you know if you have drums with the built in spacer on the back?
|
|
|
Post by minimiglia0 on Mar 11, 2010 15:30:35 GMT 1
the wheel arches at the front will need to be cut to allow the wheels to turn lock to lock also on the rear of a sportspack 5 mm spacers were fitted to ease the rubbing hope this helps
|
|
|
Post by cooper127588 on Mar 11, 2010 17:36:55 GMT 1
its back in the garage again to be sorted it has got the superfin brake drums with the 1"spacer built in and theyve chopped the front arche away to make ease of the tyre rubbing so i can put her on lock to lock now ......plus she PASSED THE MOT
|
|