|
|
Post by jd12345 on Sept 10, 2010 19:09:34 GMT 1
I have an electronic distributor in the garage that i had in my 998 engine, will it work in a 1100 engine and if so is it as simple as take the old one out and fit this one in? or is there more involved than that?
thanks
jamie
|
|
|
|
Post by dai9fxey on Sept 10, 2010 19:21:35 GMT 1
The 1100 is an A series engine and i should imagine your 998 is an A plus motor.
The dizzy you have should only suit the A plus engines.
I think you have to change the dizzy driveshaft amongst other things.
|
|
|
|
Post by jd12345 on Sept 10, 2010 19:28:53 GMT 1
thanks! i wouldnt know whether its an Aplus etc the 998 was from a 1991 mini city and the 1100 engine is from a 1976 clubman so im guessing its a no go, what do you think about the electronic kits you can buy that sit inside the distributor cap are they anygood?
|
|
|
|
Post by dai9fxey on Sept 10, 2010 20:21:22 GMT 1
I've not heard anything bad about them and they are sure to be better than the points set up any day.
There's a couple of places on ebay that sells the kits for less than £30. Bargain.
|
|
|
|
Post by jd12345 on Sept 10, 2010 20:40:05 GMT 1
|
|
|
|
Post by dai9fxey on Sept 10, 2010 21:27:13 GMT 1
Yup, that's the one.  Make sure it's the correct one for your dizzy. They do the kits for all types of dizzy. |
|
|
|
Post by jd12345 on Sept 10, 2010 21:32:49 GMT 1
cheers dai your a star! will look at them tomorrow and order one i thinks, seems as winter is now looming and rain and standard points etc dnt mix!!
|
|
