|
|
Post by Custard on Jun 25, 2011 12:55:55 GMT 1
well guys have to move end of the month so custard has to be driveable. installed loom and all, wired up. she cranks but no spark. what is the wiring on the coil, as a bit confused what goes where... plus on coil is brown-white and theres a white one too. minus side white and black.. what could be the problem, help
|
|
|
|
Post by jackdaw on Jun 25, 2011 13:30:20 GMT 1
Not sure of the colours Custard (different looms have different colours!) but the lead that goes on the negative of the coil should go to the dizzy (White/Black?). One wire that comes to the positive of the coil should be +12v from the starter solonoid and the other connection on the positive of the coil should go to the ignition light. Hope that helps some  |
|
|
|
Post by Custard on Jun 25, 2011 13:49:17 GMT 1
have got the white black to dizzy form the negative coil, positive 12 plus on the solonoid, still no spark ahhhhh
|
|
|
|
Post by jackdaw on Jun 25, 2011 13:59:16 GMT 1
|
|
|
|
Post by Custard on Jun 25, 2011 15:20:33 GMT 1
rotar arm is new  will try the other coil however dont think its the coil... think ive cocked up wiring somehow |
|
;D 
will try the other coil however dont think its the coil... think ive cocked up wiring somehow 
