|
|
Post by joshspragg on Aug 30, 2011 18:19:42 GMT 1
well i might of mentioned it before, but the front of my car is lower on the drivers side by quite abit. i've purchased 2 rubber cones thinking that will do the job. but i got told that it might not be the cones which are the problem. what would be the reason for it to drop lower on one side? so i can sort the problem out. i havent fitted the cones yet until i know for sure what i have to do to it. but i have been told that some hi los or adjusta rides would do that job.  ?? |
|
phill54
1170cc
70 mph in second gear come on baby[F4:phillip401]
Posts: 373
|
Post by phill54 on Aug 30, 2011 19:48:24 GMT 1
yeah the hi lows would let u adjust each side differently but there must be some think making it sit lower i would rather find out the problem
|
|
|
|
Post by adamdavies on Aug 30, 2011 20:28:09 GMT 1
I had the same problem with mine. But hi lows did the trick  |
|
|
|
Post by dai9fxey on Aug 30, 2011 21:11:55 GMT 1
Could be wear in the nylon cup that the Knuckle joint sits in..  The doughnut/s will have to come out to check / change it anyways. |
|
|
|
Post by joshspragg on Sept 2, 2011 0:31:42 GMT 1
ok i'll give it a go when i get the chance, thanks guys
|
|
??
